For product & service enquiries pleace contact info@rotajet.co.uk or call +44 (0) 1924 271446.


Leading Manufacturer of Degreasing Machinery and Equipment

Rotajet Immersion Agitation Washers

Enquiries

Rotajet immersion agitation washers use a combination of dunking action and chemical cleaning to clean and decarbonise components internally and externally. 


Rotajet Immersion Agitation Washers


Images:

Rotajet Immersion Agitation Washer Rotajet Immersion Agitation Washer Control Panel Rotajet Immersion Agitation Washer Side View


Description:

The Rotajet Agitation / Dunk washing machine is available in 5 standard sizes or can be custom built. The machine consists of a wash tank fitted with a pneumatically actuated rise and fall platform having a three-position control to raise, lower and agitate. Components requiring cleaning are placed on the platform either singly or in workbaskets depending in their size and then lowered into the cleaning solution, by means of a manually operated selection control, they are then agitated up and down to create a washing action, on completion of the wash the platform is raised to the top for offloading.


Specification:


GENERAL “DUNKMASTER” SPECIFICATION

Rotajet`s Agitation / Dunk Washer

Code DM1 to DM5

 

 

Rotajet DM1

Rotajet DM2

Rotajet DM3

Rotajet DM4

Rotajet DM5

Load L x W x D

520x445x 430

710x455x635

1015x585x635

1320x710x635

1625x838x635

Load capacity Kgs.

68

250

250

450

450

Liquid Capacity litres

195

500

810

1182

1610

Heating kW

6

12

24

24

36


Material of Construction:

The Rotajet Agitation / Dunk washing machines are fabricated from either stainless steel or mild steel plate with heavy section materials used for the running gear, which is mounted externally. 3mm material is used for the construction of size one machines, 5mm. for sizes 2, 3 & 4 and 6mm. for size 5.


Interlocked Lid:

The tank is fitted with a counterbalanced hinged lid, interlocked such, that it will not permit agitation of the platform to take place until the lid is closed, similarly, the platform cannot be raised with the lid in the closed position.


Insulation:

Heated Rotajet Agitation / Dunk washing machines are insulated with 30mm thick mineral wool, held in position and protected by an outer skin of 20s gauge galvanised mild steel sheet metal finish painted in Rotajet hammer blue, alternatively, British Steel Colourcoat HP200 plastic coated cladding may be used or the machine may be finished to customers specification.


Clean Out Facilities:

A drain valve and one clean out door are fitted as standard, normally situated on the right hand side of the Rotajet  Agitation / Dunk washer , but can be at either side or the front if specified when ordering.

Optionally an ‘Effluent Discharge Pump’ can be fitted.


Heating:

Electrically heated Rotajet  Agitation / Dunk washers have multiple 6kw heaters fitted to give a heat up time from ambient to 80¨C. of approximately 4 hours and sufficient to maintain temperature during normal operating circumstances, the table on page 3 shows the standard. Extra heaters may be fitted if a quicker heat up time is required and/or extra heavy masses of cold material are being processed and it is anticipated that the standard heating will be insufficient to maintain temperature. Gas heating is by means of a thermostat controlled 90 kW. Package type burner firing through a heat exchanger tube which is mounted on a removable plate for servicing.